Phone # 1- 800-678-3313    Fax: 1-616-241-1506     Store & Phone Hours: M-F, 8 - 4:30 EST                                                                        Established 1969

 

 

 

  Home  |  Products  |  Services  |  Custom Tooling  Customer Service  |  Help & Info  |  About Us
- Back
- Crosscutting Blades
- Mitre & Chop Blades
- Ripping Blades
- Strob Saw Blades
- General Purpose
- Laminate Blades
- Plastics Blades
- Non-Ferrous Blades
- Specialty Blades
- Dado Sets
- Panel Saw Main
- Panel Saw Scoring
- Edge Banding Blades

We Accept:

  

Strob Saw Blades

 

FS Tool L13 Strob Saw Blades with 2 Carbide Strobs

FS Tool L14 Strob Saw Blades with 4 Carbide Strobs

 

L13 Strob Saw Blades with 2 CT Strobs

FS Tool Industrial Saw Blades.

D E S I G N :

  • Tooth configuration: Flat Top

  • Cutting material: TC

  • Two tungsten carbide rakers
     

A P P L I C AT I O N :

  • For ripping soft and hardwoods, dry up to 15% wood moisture

  • On gang-rip saws with one or two shafts

            Standard
Teeth Kerf Plate Bore Hook Part #
10" 10+2 0.125 0.083 2-3/8" 25 L13250 (A)
12" 12+2 0.125 0.083 2-15/16" 25 L13300 (D)
12" 12+2 0.150 0.109 2-15/16" 25 L13302 (D)
14" 14+2 0.160 0.120 2-1/2" 25 L13350 (D)
14" 16+2 0.125 0.083 4" 25 L13352 (G)
(A) 1 Square keyway 3/8" x 3/8"
(D) 2 Round keyways 3/8" x 3/8" + 1 round keyway 1/2" x 1/2"
(G) 1 pinhole 7/16" diameter on a 5" bolt circle
 
L14 Strob Saw Blades with 2+2 CT Strobs

FS Tool Industrial Saw Blades.

D E S I G N :
  • Tooth configuration: Flat Top
  • Cutting material: TC
  • Two chip clearance rakers and two wiper slots


A P P L I C AT I O N :

  • For ripping soft and hardwoods, wet or frozen
  • On single and gang-rip saws with one or two shafts
            Standard
Teeth Kerf Plate Bore Hook Part #
10" 18+2+2 0.174 0.110 2-3/8" 25 L14250 (A)
12" 20+2+2 0.197 0.125 2-15/16" 25 L14300 (D)
14" 24+2+2 0.197 0.125 2-1/2" 25 L14350 (D)
14" 24+2+2 0.197 0.125 4" 25 L14352 (G)
(A) 1 Square keyway 3/8" x 3/8"
(D) 2 Round keyways 3/8" x 3/8" + 1 round keyway 1/2" x 1/2"
(G) 1 pinhole 7/16" diameter on a 5" bolt circle
 
 
 

2008 Carbide Specialties Incorporated

Report problems or suggestions to our Webmaster.

Strob Saw Blades