Phone # 1- 800-678-3313    Fax: 1-616-241-1506     Store & Phone Hours: M-F, 8 - 4:30 EST                                                                        Established 1969

 

 

 

  Home  |  Products  |  Services  |  Custom Tooling  Customer Service  |  Help & Info  |  About Us
- Back
- Surfacing Heads
- Corrugated  Heads

We Accept:

  

Corrugated Moulder Heads

 

 

 

Straight Bore Moulder Heads

Hydro-Loc Moulder Heads

Dual Hook Moulder Heads

 

Straight Bore Moulder Heads

We offer a complete line of straight bore corrugated pocket moulder heads that fit most moulders & shapers. If our stock dual hook moulder heads are not what you want, we will make heads special for your situation. We can make heads to any one of four different hook angles, and a number of special bore sizes, or we can add other special features. All heads are precision CNC machined from high strength steel & ISO GQ 1.0 balanced to 8,000 rpm. Heads are made to exceed the most stringent European OEM standards allowing you to produce smooth material finishes with years of trouble free use. Choose your cutting angle 10, 12, 15, or 20 degrees or a combination of these in the same cutterhead if you cut both hardwoods and softwoods. Heads are made to order in about 3 weeks. Organized by body diameters:

 
4" / 100mm Diameter x 1.250" Bore
 
Cut # of Part
Length Knives #
1.96 4 MH100-4-50
2.36 4 MH100-4-60
3.15 4 MH100-4-80
3.94 4 MH100-4-100
5.91 4 MH100-4-150
All Dimensions in inches unless otherwise specified.
  Shapers, Paulson, XL, & Import Brand Moulders:
The S100 MTO line of heads have a 4" body diameter with an 1-1/4" bore. Designed for spindle shapers and most of the smaller non-jointed moulders. These heads offer the flexibility to use corrugated knife steel with high rpm rotation. 2-knife versions are also offered at a 10% savings. Bore T-bushings offered for smaller shapers with 1" diameter spindles.
 
4.8" / 122mm Diameter x 1.500" or 40mm Bore
 
Cut # of Part
Length Knives #
1.96 4 MH122-4-50
2.36 4 MH122-4-60
3.15 4 MH122-4-80
3.94 4 MH122-4-100
5.12 4 MH122-4-130
5.91 4 MH122-4-150
7.08 4 MH122-4-180
9.05 4 MH122-4-230
All Dimensions in inches unless otherwise specified.
  Weinig, Wadkin, SCMI, IIda, LeaderMac, Woodmizer, Silver, & other Mid-Sized Moulders:
The S122 line with a 4.80" body diameter is designed for use on most European & Asian imported moulders. Stock head sizes come with either a 40 mm or 1-1/2" spindle bore. This line of heads uses industry standard features and metric hardware, plus we have added features not offered by the German tool makers like; a high alloy tool steel body for greater tool life and deeper knife pockets to allow wider steel to be used for additional resharpenings. Knife pockets are designed to accept from 3/16" thick steel up to 10mm thick corrugated steel.

Please specify Bore Size when ordering.

 
5.4" / 137mm Diameter x 1.813" or 2.125" Bore
 
Cut # of Part
Length Knives #
2.36 4 MH137-4-60
3.94 4 MH137-4-100
5.12 4 MH137-4-130
5.91 4 MH137-4-150
7.08 4 MH137-4-180
9.05 4 MH137-4-230
12.2 4 MH137-4-310
2.36 6 MH137-6-60
3.94 6 MH137-6-100
5.12 6 MH137-6-130
5.91 6 MH137-6-150
7.08 6 MH137-6-180
9.05 6 MH137-6-230
12.2 6 MH137-6-310
All Dimensions in inches unless otherwise specified.
  Weinig, Wadkin, SCMI, IIda, LeaderMac, Woodmizer, Silver, & other Mid-Sized Moulders:
The S137 line with a 5.40" body diameter is designed for use on European & Asian imported moulders that have larger spindle diameters. Our stock head sizes come with either an 1-13/16" or 2-1/8" spindle bore. Heads include industry standard features, plus we use heat treated alloy steel for greater strength, and dynamic balance them to 8,000 rpm (ISO grade
quality 1.0) for smoother cutting. A H7 precision bore tolerance is used to decrease radial run-out and provide the smoothest cut possible with a straight bore head.

Please specify Bore Size when ordering.

 
Hydro-Loc Bore Moulder Heads
We offer an expansive line of hydro-loc moulder heads for high production
moulders. You choose the cutting angle; 10, 12, 15, 20 degrees, etc. Made
from high strength hardened steel, CNC machined to exacting tolerances and
balanced to run up to 8000 rpm. Our heads offer finer surface finishes with the
durability to withstand years of continuous use on high speed moulders. Heads are offered in a variety of sizes to fit your machine, note the body diameters and bore sizes listed. Heads are made to order in about 3 weeks
 
4.8" / 122mm Diameter x 1.500" or 40mm Bore
 
Cut # of Part
Length Knives #
2.36 4 MH122-4-60HL
3.94 4 MH122-4-100HL
5.91 4 MH122-4-150HL
7.09 4 MH122-4-180HL
9.05 4 MH122-4-230HL
All Dimensions in inches unless otherwise specified.
  Weinig, Wadkin, SCMI, IIda, LeaderMac, Woodmizer, Silver, & other Mid-Sized Moulders:
For use with smaller moulders that require the 122mm body diameter and the added benefit of precision tool centering for
smoother cutting on non-jointed machines. Heads include all standard features with built-in hydro-sleeves. Offered in either
40mm bore or 1.50" bore. Call for custom bore prices.

Please specify Bore Size when ordering.

 
5.4" / 137mm Diameter x 1.813"  Bore
 
Cut # of Part
Length Knives #
2.36 4 MH137-4-60HL
3.94 4 MH137-4-100HL
5.12 4 MH137-4-130HL
5.91 4 MH137-4-150HL
7.09 4 MH137-4-180HL
9.06 4 MH137-4-230HL
10.23 4 MH137-4-260HL
12.2 4 MH137-4-310HL
All Dimensions in inches unless otherwise specified.
  Weinig, Wadkin, SCMI, IIda, LeaderMac, Woodmizer, Silver, & other Mid-Sized Moulders:
These heads are used on moulders with larger spindles and larger cutting capacities. Heads are precision made to run to 8000 rpm and are dynamic balanced to ISO Grade quality 1.0.
Heads are offered with all the industry standard features and metric hardware; knife pockets are designed to accept knife
steel from 3/16" thick up to 10mm thick corrugated. Heads are made to order - you choose the cutting angle. Dual hook, or
single hook on all 4-pockets for high speed jointed moulders. Jointed knife feed speeds up to 200 ft. per min.

Please specify Bore Size when ordering.

 
5.9" / 150mm Diameter x 1.813", 2.125", or 50mm Bore
 
Cut # of Part
Length Knives #
2.36 4 MH150-4-60HL
3.94 4 MH150-4-100-HL
5.12 4 MH150-4-130HL
5.91 4 MH150-4-150HL
7.08 4 MH150-4-180HL
9.05 4 MH150-4-230HL
12.2 4 MH150-4-310HL
2.36 6 MH150-6-100HL
3.94 6 MH150-6-100-HL
5.12 6 MH150-6-130HL
5.91 6 MH150-6-150HL
7.08 6 MH150-6-180HL
9.05 6 MH150-6-230HL
12.2 6 MH150-6-310HL
All Dimensions in inches unless otherwise specified.
  Weinig, Mattison, Wadkin, Diehl, LeaderMac, and
other jointed high speed Moulders:

The H150 line is for use on high speed jointed moulders. Offered in 4 or 6-knife pockets for feed speeds up to 300 ft per min. and up to 8000 rpm. Call for additional prices on 8 and 10-knife heads in the 163mm body diameter. Standard heads come with your choice of cutting angles and bore size. Heads are made in about 3 weeks to the cutting angle you need. Hydro-Sleeves are made from high yield strength alloy steel to avoid deforming the sleeves over years of use. To avoid damage be sure to always use safety lock collars at all times. Do not exceed max. pressure on heads, do not pressurize heads on an undersized
spindle, or spindles with keyways. Check pressure daily.

Please specify Bore Size when ordering.

 
Dual Hook Angle Moulder Heads
We offer a complete line of dual cutting angle moulder heads for cutting both hard and softwoods with the same tool - like getting two heads for the price of one! This is the best choice for custom millwork producers who need the flexibility to handle any job at a moments notice without having to stock many different cutterheads. Our stock heads are 12 degree cutting angle for hardwood to reduce raised grain, and 20 degree cutting angle to reduce fuzzing in softwoods. Only 2-knives are required on un-jointed moulders, using 4-knives will not improve the surface finish. We can also supply filler wedges for the empty un-used pockets. All heads are precision CNC machined from high strength hardened alloy steel and designed to operate at speeds up to 7,200 rpm. Heads are made to exceed the most stringent European OEM
standards allowing you to produce smooth material finish with years of trouble free use.
 
4" / 100mm Diameter x 1.250" Bore
 
Cut # of Part
Length Knives #
1.96 4 MH100-4-50D
2.36 4 MH100-4-60D
3.15 4 MH100-4-80D
3.94 4 MH100-4-100D
5.91 4 MH100-4-150D
All Dimensions in inches unless otherwise specified.
  Shapers, Paulson, XL, & Import Brand Moulders:
The S100 dual hook line of heads have a 4" body diameter with a 1-1/4" bore. Designed for spindle shapers and most of the smaller non-jointed moulders. These heads offer the flexibility to use corrugated knife steel with high rpm rotation and cut either hard or softwoods with the same head body. Bore bushings can be offered for shapers with 1" diameter spindles.
 
4.8" / 122mm Diameter x 1.500" or 40mm Bore
 
Cut # of Part
Length Knives #
1.96 4 MH122-4-50D
2.36 4 MH122-4-60D
3.15 4 MH122-4-80D
3.94 4 MH122-4-100D
5.12 4 MH122-4-130D
5.91 4 MH122-4-150D
7.08 4 MH122-4-180D
9.05 4 MH122-4-230D
All Dimensions in inches unless otherwise specified.
  Weinig, Wadkin, SCMI, IIda, LeaderMac, Woodmizer, Silver, & other Mid-Sized Moulders:
The S122 line with a 4.80" body diameter is designed for use on most European & Asian imported moulders. Stock head
sizes come with either a 40 mm or 1-1/2" spindle bore. This line of heads uses industry standard features and metric
hardware, plus we have added a features not offered by the German tool makers like; a high alloy strong tool steel body for
greater tool life and deeper knife pockets to allow wider and thicker steel to be used for additional resharpenings.

Please specify Bore Size when ordering.

 
5.4" / 137mm Diameter x 1.813" or 2.125" Bore
 
Cut # of Part
Length Knives #
2.36 4 MH137-4-60D
3.94 4 MH137-4-100D
5.12 4 MH137-4-130D
5.91 4 MH137-4-150D
7.08 4 MH137-4-180D
9.05 4 MH137-4-230D
All Dimensions in inches unless otherwise specified.
  Weinig, Wadkin, SCMI, IIda, LeaderMac, Woodmizer, Silver, & other Mid-Sized Moulders:
The S137 line with a 5.40" body diameter is designed for use on European & Asian imported moulders that have larger
spindle diameters. Our stock head sizes come with either a 1- 13/16" or 2-1/8" spindle bore. This line of heads uses industry standard features and metric hardware, plus we have added a
features not offered by the German tool makers like; a high alloy strong tool steel body for greater tool life and deeper knife
pockets to allow wider and thicker steel to be used for additional resharpenings. Limited stock on 2-1/8" bore heads.

Please specify Bore Size when ordering.

 

Do you need knife stock to grind your own knives.

 

Do you need a template for grinding knives?

2008 Carbide Specialties Incorporated

Report problems or suggestions to our Webmaster.

- Corrugated Heads