Phone # 1- 800-678-3313    Fax: 1-616-241-1506     Store & Phone Hours: M-F, 8 - 4:30 EST                                                                        Established 1969

 

 

 

  Home  |  Products  |  Services  |  Custom Tooling  Customer Service  |  Help & Info  |  About Us
- Back
- CT Dowel Bits
- SC Dowel Drills
- Hinge Boring Bits

We Accept:

  

Carbide Tipped Dowel Bits

 

CT Brad Point Dowel Bits 57.5mm OAL

CT Brad Point Dowel Bits 70mm OAL

CT Brad Point Dowel Bits 77mm OAL

CT Through Point Dowel Bits 57.5mm OAL

CT Through Point Dowel Bits 70mm OAL

CT Through Point Dowel Bits 77mm OAL

Spare Screws for Dowel Bits

 

CT Dowel Bits, Brad Point

2 Flutes,10mm Shanks, & 57.5mm OAL

Technical

 

Applications

Premium quality super strength steel body.


Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.


Solid tungsten carbide tip with center point, two cutting edges, and two negatively ground spurs.


Parallel ground shank with machined flat for driving and a length adjusting screw

 

Drilling of blind holes in wood, wood composites, plastic, and laminated materials.


Used in boring machines equipped with adapters or chucks.

 

 
Cutting  Flute Shank Right Hand Left Hand
Diameter Length Length Tool # Tool #
3 18 27 201003 301003
3.2 27 27 201032 301032
5/32” / 4 18 27 310.040.11 310.040.12
4.5 22 27 310.045.11 310.045.12
4.76 27 27 310.047.11 310.047.12
5 27 27 310.050.11 310.050.12
5.1 27 27 310.051.11 310.051.12
5.2 27 27 310.052.11 310.052.12
5.55 27 27 310.055.11 310.055.12
6 27 27 310.060.11 310.060.12
6.35 27 27 310.064.11 310.064.12
6.5 27 27 310.065.11 310.065.12
6.7 27 27 201067 301067
7 27 27 310.070.11 310.070.12
9/32” 30 27 134040R 134040L
7.5 27 27 201075 301075
8 27 27 310.080.11 310.080.12
8.2 27 27 310.082.11 310.082.12
8.5 30 27 134053R 134053L
11/32” 30 27 134054R 134054L
9 27 27 310.090.11 310.090.12
9.52 27 27 310.095.11 310.095.12
10 27 27 310.100.11 310.100.12
10.5 27 27 201105 301105
11 27 27 310.110.11 310.110.12
12 27 27 310.120.11 310.120.12
12.7 27 27 310.127.11 310.127.12
13 27 27 310.130.11 310.130.12
14 27 27 310.140.11 310.140.12
15 27 27 310.150.11 310.150.12
5/8” 30 27 134141R 134141L
16 27 27 310.160.11 310.160.12
17 27 27 201017 301017
18 27 27 201018 301018
19 27 27 201019 301019
20 27 27 201020 301020
All dimensions are in Millimeters (mm) unless otherwise specified.
 

CT Dowel Bits, Brad Point

2 Flutes,10mm Shanks, & 70mm OAL

Technical

 

Applications

Premium quality super strength steel body.


Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.


Solid tungsten carbide tip with center point, two cutting edges, and two negatively ground spurs.


Parallel ground shank with machined flat for driving and a length adjusting screw

 

Drilling of blind holes in wood, wood composites, plastic, and laminated materials.


Used in boring machines equipped with adapters or chucks.

 

 
Cutting Flute Shank Right Hand Left Hand
Diameter Length Length Tool # Tool #
3 18 35 204003 304003
3.2 35 35 204032 304032
5/32” / 4 26 30 311.040.11 311.040.12
4.5 35 30 311.045.11 311.045.12
3/16” 35 30 311.047.11 311.047.12
5 35 30 311.050.11 311.050.12
5.1 35 30 311.051.11 311.051.12
5.2 35 30 311.052.11 311.052.12
7/32” 35 30 311.055.11 311.055.12
6 35 30 311.060.11 311.060.12
1/4” 35 30 311.064.11 311.064.12
6.5 35 30 311.065.11 311.065.12
6.7 35 35 204067 304067
7 35 30 311.070.11 311.070.12
9/32” 41 29 1340431R 1340431L
7.5 35 35 204075 304075
8 35 30 311.080.11 311.080.12
8.2 35 30 311.082.11 311.082.12
8.5 41 29 1340522R 1340522L
8.7 41 29 1340523R 1340523L
9 35 30 311.090.11 311.090.12
3/8” 35 30 311.095.11 311.095.12
10 35 30 311.100.11 311.100.12
11 35 30 311.110.11 311.110.12
7/16” 35 30 311.111.11 311.111.12
12 35 30 311.120.11 311.120.12
1/2” 35 30 311.127.11 311.127.12
13 35 30 311.130.11 311.130.12
14 35 30 311.140.11 311.140.11
15 35 30 311.150.11 311.150.12
5/8” 35 35 204113 304113
16 35 30 311.160.11 311.160.11
17 35 35 204075 304075
18 41 29 134162R 134162L
19 41 29 134163R 134163L
20 41 29 134164R 134164L
All dimensions are in Millimeters (mm) unless otherwise specified.
 

CT Dowel Bits, Brad Point

2 Flutes,10mm Shanks, & 77mm OAL

Technical

 

Applications

Premium quality super strength steel body.


Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.


Solid tungsten carbide tip with center point, two cutting edges, and two negatively ground spurs.


Parallel ground shank with machined flat for driving and a length adjusting screw

 

Drilling of blind holes in wood, wood composites, plastic, and laminated materials.


Used in boring machines equipped with adapters or chucks.

 

 
Cutting Flute Shank Right Hand Left Hand
Diameter Length Length Tool # Tool #
5/32” / 4 44 30 202004 302004
5 44 30 362.050.11 362.050.12
5.1 44 30 202051 302051
5.2 44 30 202052 302052
5.5 48 29 1340217R 1340217L
6 44 30 362.060.11 362.060.12
1/4” 48 29 1340247R 1340247L
6.5 48 29 1340248R 1340248L
7 44 30 362.070.11 362.070.12
8 44 30 362.080.11 362.080.12
8.2 44 30 202082 302082
9 44 30 202090 302090
3/8” 48 29 1340717R 1340717L
10 44 30 362.100.11 362.100.12
11 44 30 202011 302011
12 44 30 362.120.11 362.120.12
All dimensions are in Millimeters (mm) unless otherwise specified.
 

CT Dowel Bits, Through Point

2 Flutes,10mm Shanks, & 57.5mm OAL

Technical

 

Applications

Premium quality super strength steel body.


Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.


Solid tungsten carbide tip with 60Ί included angle center point and two cutting edges.


Parallel ground shank with machined flat for driving and a length adjusting screw

 

Drilling of through holes in wood, wood composites, plastic, and laminated materials.


Used in boring machines equipped with adapters or chucks.

 

 
Cutting Flute Shank Right Hand Left Hand
Diameter Length Length Tool # Tool #
5/32” / 4 25 25 313004 413004
3/16” 31 26 324040R 324040L
5 27 26 313.050.11 313.050.12
5.2 31 26 324050R 324050R
5.5 31 26 324051R 324051L
6 27 26 313.060.11 313.060.12
1/4” 25 25 313007 413007
6.5 31 26 3240636R 3240636L
7 25 25 313070 413070
8 27 26 313.080.11 313.080.12
9 25 25 313090 413090
3/8” 25 25 313009 413009
10 27 26 313.100.11 313.100.12
11 31 26 32412R 32412L
12 25 25 313012 413012
1/2” 25 25 313013 413013
13 31 26 32415R 32415L
14 31 26 32416R 32416L
15 31 26 32417R 32417L
16 31 26 32418R 32418L
All dimensions are in Millimeters (mm) unless otherwise specified.
 

CT Dowel Bits, Through Point

2 Flutes,10mm Shanks, & 70mm OAL

Technical

 

Applications

Premium quality super strength steel body.


Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.


Solid tungsten carbide tip with 60Ί included angle center point and two cutting edges.


Parallel ground shank with machined flat for driving and a length adjusting screw

 

Drilling of through holes in wood, wood composites, plastic, and laminated materials.


Used in boring machines equipped with adapters or chucks.

 

 
Cutting Flute Shank Right Hand Left Hand
Diameter Length Length Tool # Tool #
5/32” / 4 30 26 314.040.11 314.040.12
4.5 40 20 D50K045R D50K045L
3/16” 35 26 314.047.11 314.047.12
4.83 40 20 D50K0483R D50K0483L
5 35 26 314.050.11 314.050.12
5.2 43 27 325050R 325050L
7/32” 35 26 314.055.11 314.055.12
6 35 26 314.060.11 314.060.12
1/4” 35 26 314.064.11 314.064.12
6.5 43 27 325065R 325065L
7 35 26 314.070.11 314.070.12
9/32” 40 40 314281 414281
8 35 26 314.080.11 314.080.12
21/64” 40 40 314833 414833
11/32” 40 40 314343 414343
9 35 26 314.090.11 314.090.12
3/8” 35 26 314.095.11 314.095.12
10 35 26 314.100.11 314.100.12
11 40 40 314011 414011
7/16” 40 40 314111 414111
12 35 26 314.120.11 314.120.12
13 43 27 325128R 325128L
1/2” 35 26 314.127.11 314.127.12
14 40 40 314014 414014
15 43 27 325130R 325130L
5/8” 40 40 314113 414113
16 40 40 314016 414016
16.5 43 27 325132R 325132L
17 43 27 325133R 325133L
18 43 27 325134R 325134L
19 43 27 325135R 325135L
20 43 27 325136R 325136L
All dimensions are in Millimeters (mm) unless otherwise specified.
 

CT Dowel Bits, Through Point

2 Flutes,10mm Shanks, & 77mm OAL

Technical

 

Applications

Premium quality super strength steel body.


Two flutes coated with Teflon™, black for right hand bits and orange for left hand bits.


Solid tungsten carbide tip with 60Ί included angle center point and two cutting edges.


Parallel ground shank with machined flat for driving and a length adjusting screw

 

Drilling of through holes in wood, wood composites, plastic, and laminated materials.


Used in boring machines equipped with adapters or chucks.

 

 
Cutting Flute Shank Right Hand Left Hand
Diameter Length Length Tool # Tool #
5/32” / 4 50 27 325047R 325047L
5 44 30 366.050.11 366.050.12
5.2 45 25 D50Z052R D50Z052L
5.5 50 27 325058R 325058L
6 44 30 366.060.11 366.060.12
1/4” 50 27 325068R 325068L
9/32” 50 27 325070R 325070L
8 44 30 366.080.11 366.080.12
8.2 50 27 325088R 325088L
9 50 27 325089R 325089L
10 44 30 366.100.11 366.100.12
12 44 30 366.120.11 366.120.12
All dimensions are in Millimeters (mm) unless otherwise specified.
 

Spare Screws for Dowel Bits

 
Description Item Number
M5 x 10mm Shank Screw 990.003.00
 
 
 

© 2008 Carbide Specialties Incorporated

Report problems or suggestions to our Webmaster.

Carbide Tipped  Dowel Bits